BenQ DC X835 vs. BenQ DC C740i
Comparison
| change cameras » | |||||
|
vs |
|
|||
| BenQ DC X835 | BenQ DC C740i | ||||
| check price » | check price » | ||||
Megapixels
8.00
7.00
Max. image resolution
3264 x 2448
3072 x 2304
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| BenQ DC X835 | BenQ DC C740i | |
Surface area:
| 24.84 mm² | vs | 24.84 mm² |
Difference: 0 mm² (0%)
DC X835 and DC C740i sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.43 µm² (14%)
A pixel on BenQ DC C740i sensor is approx. 14% bigger than a pixel on BenQ DC X835.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
BenQ DC X835
BenQ DC C740i
Total megapixels
Effective megapixels
Optical zoom
Yes
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600,2000, 6400
Auto, 50, 100, 200, 400, 800, 1000
RAW
Manual focus
Normal focus range
40 cm
50 cm
Macro focus range
15 cm
15 cm
Focal length (35mm equiv.)
37 - 112 mm
37 - 112 mm
Aperture priority
No
No
Max. aperture
f2.7 - f5.2
f2.8 - f5.2
Metering
Centre weighted
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
8 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
6
Screen size
2.5"
2.5"
Screen resolution
230,000 dots
150,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
2x AA
Weight
120 g
140 g
Dimensions
91 x 59 x 14.7 mm
91.5 x 61.5 x 26 mm
Year
2007
2007
Choose cameras to compare
Popular comparisons:
- BenQ DC X835 vs. BenQ DC C840
- BenQ DC X835 vs. Panasonic Lumix DMC-FS10
- BenQ DC X835 vs. BenQ DC X725
- BenQ DC X835 vs. Olympus Stylus 850 SW
- BenQ DC X835 vs. Canon IXUS 165
- BenQ DC X835 vs. BenQ DC C1450
- BenQ DC X835 vs. Canon PowerShot SX500 IS
- BenQ DC X835 vs. BenQ DC C740i
- BenQ DC X835 vs. Sony Cyber-shot DSC-WX220
- BenQ DC X835 vs. Sony Cyber-shot DSC-T10
- BenQ DC X835 vs. Panasonic Lumix DMC-LX7
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
BenQ DC X835 diagonal
The diagonal of DC X835 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
BenQ DC C740i diagonal
The diagonal of DC C740i sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DC X835 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
DC C740i sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DC X835 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3262 pixels
Sensor resolution width = 3262 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.76 µm |
| 3262 |
DC C740i pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3051 pixels
Sensor resolution width = 3051 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.88 µm |
| 3051 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DC X835 pixel area
Pixel pitch = 1.76 µm
Pixel area = 1.76² = 3.1 µm²
Pixel area = 1.76² = 3.1 µm²
DC C740i pixel area
Pixel pitch = 1.88 µm
Pixel area = 1.88² = 3.53 µm²
Pixel area = 1.88² = 3.53 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DC X835 pixel density
Sensor resolution width = 3262 pixels
Sensor width = 0.575 cm
Pixel density = (3262 / 0.575)² / 1000000 = 32.18 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3262 / 0.575)² / 1000000 = 32.18 MP/cm²
DC C740i pixel density
Sensor resolution width = 3051 pixels
Sensor width = 0.575 cm
Pixel density = (3051 / 0.575)² / 1000000 = 28.15 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3051 / 0.575)² / 1000000 = 28.15 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DC X835 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 8.00
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Sensor height = 4.32 mm
Effective megapixels = 8.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
DC C740i sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.00
Resolution horizontal: X × r = 2294 × 1.33 = 3051
Resolution vertical: X = 2294
Sensor resolution = 3051 x 2294
Sensor height = 4.32 mm
Effective megapixels = 7.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2294
Sensor resolution = 3051 x 2294
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DC X835 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
DC C740i crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DC X835 equivalent aperture
Crop factor = 6.02
Aperture = f2.7 - f5.2
35-mm equivalent aperture = (f2.7 - f5.2) × 6.02 = f16.3 - f31.3
Aperture = f2.7 - f5.2
35-mm equivalent aperture = (f2.7 - f5.2) × 6.02 = f16.3 - f31.3
DC C740i equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 6.02 = f16.9 - f31.3
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 6.02 = f16.9 - f31.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.