HP Photosmart R507 vs. Fujifilm FinePix A500 Zoom
Comparison
| change cameras » | |||||
|
vs |
|
|||
| HP Photosmart R507 | Fujifilm FinePix A500 Zoom | ||||
| check price » | check price » | ||||
Megapixels
4.20
5.10
Max. image resolution
2320 x 1740
2592 x 1944
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| HP Photosmart R507 | Fujifilm FinePix A500 Zoom | |
Surface area:
| 24.84 mm² | vs | 24.84 mm² |
Difference: 0 mm² (0%)
R507 and A500 Zoom sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 2 year gap between HP R507 (2004) and Fujifilm A500 Zoom (2006).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.02 µm² (21%)
A pixel on HP R507 sensor is approx. 21% bigger than a pixel on Fujifilm A500 Zoom.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
HP R507
Fujifilm A500 Zoom
Total megapixels
5.10
Effective megapixels
5.10
Optical zoom
3x
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400
Auto, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
60 cm
Macro focus range
14 cm
10 cm
Focal length (35mm equiv.)
35 - 105 mm
38 - 114 mm
Aperture priority
No
No
Max. aperture
f2.6 - f4.8
f3.3 - f5.5
Metering
Centre weighted, Evaluative, Spot
Multi, Average, Spot
Exposure compensation
±3 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
16 sec
2 sec
Max. shutter speed
1/2000 sec
1/1500 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
6
5
Screen size
1.5"
1.8"
Screen resolution
120,000 dots
77,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
xD Picture Card, Internal
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
HP Lithium-Ion rechargeable supplied
AA (2) batteries (NiMH recommended)
Weight
132 g
170 g
Dimensions
87 x 57 x 28 mm
93 x 60 x 28 mm
Year
2004
2006
Choose cameras to compare
Popular comparisons:
- HP Photosmart R507 vs. Canon PowerShot G3 X
- HP Photosmart R507 vs. Nikon Coolpix S6300
- HP Photosmart R507 vs. Canon Digital IXUS 60
- HP Photosmart R507 vs. HP Photosmart R727
- HP Photosmart R507 vs. Nikon Coolpix L5
- HP Photosmart R507 vs. Sony Cyber-shot DSC-P5
- HP Photosmart R507 vs. Canon Digital IXUS 40
- HP Photosmart R507 vs. Canon Digital IXUS 900 Ti
- HP Photosmart R507 vs. Sony Cyber-shot DSC-W12
- HP Photosmart R507 vs. Sony Cyber-shot DSC-W150
- HP Photosmart R507 vs. Fujifilm FinePix A500 Zoom
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
HP R507 diagonal
The diagonal of R507 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Fujifilm A500 Zoom diagonal
The diagonal of A500 Zoom sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
R507 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
A500 Zoom sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
R507 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2363 pixels
Sensor resolution width = 2363 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.43 µm |
| 2363 |
A500 Zoom pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2604 pixels
Sensor resolution width = 2604 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.21 µm |
| 2604 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
R507 pixel area
Pixel pitch = 2.43 µm
Pixel area = 2.43² = 5.9 µm²
Pixel area = 2.43² = 5.9 µm²
A500 Zoom pixel area
Pixel pitch = 2.21 µm
Pixel area = 2.21² = 4.88 µm²
Pixel area = 2.21² = 4.88 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
R507 pixel density
Sensor resolution width = 2363 pixels
Sensor width = 0.575 cm
Pixel density = (2363 / 0.575)² / 1000000 = 16.89 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2363 / 0.575)² / 1000000 = 16.89 MP/cm²
A500 Zoom pixel density
Sensor resolution width = 2604 pixels
Sensor width = 0.575 cm
Pixel density = (2604 / 0.575)² / 1000000 = 20.51 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2604 / 0.575)² / 1000000 = 20.51 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
R507 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.20
Resolution horizontal: X × r = 1777 × 1.33 = 2363
Resolution vertical: X = 1777
Sensor resolution = 2363 x 1777
Sensor height = 4.32 mm
Effective megapixels = 4.20
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1777
Sensor resolution = 2363 x 1777
A500 Zoom sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.10
Resolution horizontal: X × r = 1958 × 1.33 = 2604
Resolution vertical: X = 1958
Sensor resolution = 2604 x 1958
Sensor height = 4.32 mm
Effective megapixels = 5.10
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1958
Sensor resolution = 2604 x 1958
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
R507 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
A500 Zoom crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
R507 equivalent aperture
Crop factor = 6.02
Aperture = f2.6 - f4.8
35-mm equivalent aperture = (f2.6 - f4.8) × 6.02 = f15.7 - f28.9
Aperture = f2.6 - f4.8
35-mm equivalent aperture = (f2.6 - f4.8) × 6.02 = f15.7 - f28.9
A500 Zoom equivalent aperture
Crop factor = 6.02
Aperture = f3.3 - f5.5
35-mm equivalent aperture = (f3.3 - f5.5) × 6.02 = f19.9 - f33.1
Aperture = f3.3 - f5.5
35-mm equivalent aperture = (f3.3 - f5.5) × 6.02 = f19.9 - f33.1
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.