Kodak DCS520 vs. Kodak DCS460
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Kodak DCS520 | Kodak DCS460 | ||||
| check price » | check price » | ||||
Megapixels
2.00
6.20
Max. image resolution
1728 x 1152
3060 x 2036
Sensor
Sensor type
CCD
CCD
Sensor size
27.65 x 18.43 mm
27.65 x 18.43 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Kodak DCS520 | Kodak DCS460 | |
Surface area:
| 509.59 mm² | vs | 509.59 mm² |
Difference: 0 mm² (0%)
DCS520 and DCS460 sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Kodak DCS520 (1998) and Kodak DCS460 (1995).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 172.14 µm² (209%)
A pixel on Kodak DCS520 sensor is approx. 209% bigger than a pixel on Kodak DCS460.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Kodak DCS520
Kodak DCS460
Total megapixels
6.20
Effective megapixels
6.20
Optical zoom
Digital zoom
No
No
ISO sensitivity
200, 400, 800, 1600
80
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
1/4 sec
1/2 sec
Max. shutter speed
1/400 sec
1/362 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
5
5
Screen size
2"
1.8"
Screen resolution
72,000 dots
72,000 dots
Video capture
Max. video resolution
Storage types
PCMCIA (2 x type II / 1 x type III)
PCMCIA (type III)
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
Kodak NiCD
Kodak NiMH
Weight
1650 g
1700 g
Dimensions
161 x 92 x 174 mm
170 x 114 x 208 mm
Year
1998
1995
Choose cameras to compare
Popular comparisons:
- Kodak DCS520 vs. Canon EOS-1D
- Kodak DCS520 vs. Nikon D1
- Kodak DCS520 vs. Kodak DCS560
- Kodak DCS520 vs. Kodak DCS620
- Kodak DCS520 vs. Kodak DCS460
- Kodak DCS520 vs. Pentax *ist DS
- Kodak DCS520 vs. Kodak DCS760
- Kodak DCS520 vs. Kodak DCS620x
- Kodak DCS520 vs. Kodak DCS330
- Kodak DCS520 vs. Canon EOS D30
- Kodak DCS520 vs. Sony Alpha a7R III
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Kodak DCS520 diagonal
w = 27.65 mm
h = 18.43 mm
h = 18.43 mm
| Diagonal = √ | 27.65² + 18.43² | = 33.23 mm |
Kodak DCS460 diagonal
w = 27.65 mm
h = 18.43 mm
h = 18.43 mm
| Diagonal = √ | 27.65² + 18.43² | = 33.23 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DCS520 sensor area
Width = 27.65 mm
Height = 18.43 mm
Surface area = 27.65 × 18.43 = 509.59 mm²
Height = 18.43 mm
Surface area = 27.65 × 18.43 = 509.59 mm²
DCS460 sensor area
Width = 27.65 mm
Height = 18.43 mm
Surface area = 27.65 × 18.43 = 509.59 mm²
Height = 18.43 mm
Surface area = 27.65 × 18.43 = 509.59 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DCS520 pixel pitch
Sensor width = 27.65 mm
Sensor resolution width = 1733 pixels
Sensor resolution width = 1733 pixels
| Pixel pitch = | 27.65 | × 1000 | = 15.95 µm |
| 1733 |
DCS460 pixel pitch
Sensor width = 27.65 mm
Sensor resolution width = 3050 pixels
Sensor resolution width = 3050 pixels
| Pixel pitch = | 27.65 | × 1000 | = 9.07 µm |
| 3050 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DCS520 pixel area
Pixel pitch = 15.95 µm
Pixel area = 15.95² = 254.4 µm²
Pixel area = 15.95² = 254.4 µm²
DCS460 pixel area
Pixel pitch = 9.07 µm
Pixel area = 9.07² = 82.26 µm²
Pixel area = 9.07² = 82.26 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DCS520 pixel density
Sensor resolution width = 1733 pixels
Sensor width = 2.765 cm
Pixel density = (1733 / 2.765)² / 1000000 = 0.39 MP/cm²
Sensor width = 2.765 cm
Pixel density = (1733 / 2.765)² / 1000000 = 0.39 MP/cm²
DCS460 pixel density
Sensor resolution width = 3050 pixels
Sensor width = 2.765 cm
Pixel density = (3050 / 2.765)² / 1000000 = 1.22 MP/cm²
Sensor width = 2.765 cm
Pixel density = (3050 / 2.765)² / 1000000 = 1.22 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DCS520 sensor resolution
Sensor width = 27.65 mm
Sensor height = 18.43 mm
Effective megapixels = 2.00
Resolution horizontal: X × r = 1155 × 1.5 = 1733
Resolution vertical: X = 1155
Sensor resolution = 1733 x 1155
Sensor height = 18.43 mm
Effective megapixels = 2.00
| r = 27.65/18.43 = 1.5 |
|
Resolution vertical: X = 1155
Sensor resolution = 1733 x 1155
DCS460 sensor resolution
Sensor width = 27.65 mm
Sensor height = 18.43 mm
Effective megapixels = 6.20
Resolution horizontal: X × r = 2033 × 1.5 = 3050
Resolution vertical: X = 2033
Sensor resolution = 3050 x 2033
Sensor height = 18.43 mm
Effective megapixels = 6.20
| r = 27.65/18.43 = 1.5 |
|
Resolution vertical: X = 2033
Sensor resolution = 3050 x 2033
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DCS520 crop factor
Sensor diagonal in mm = 33.23 mm
| Crop factor = | 43.27 | = 1.3 |
| 33.23 |
DCS460 crop factor
Sensor diagonal in mm = 33.23 mm
| Crop factor = | 43.27 | = 1.3 |
| 33.23 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DCS520 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Kodak DCS520, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Kodak DCS520 is 1.3
Crop factor for Kodak DCS520 is 1.3
DCS460 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Kodak DCS460, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Kodak DCS460 is 1.3
Crop factor for Kodak DCS460 is 1.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.