Kodak EasyShare V610 vs. Olympus Stylus 7030

Comparison

change cameras »

Kodak EasyShare V610

Olympus Stylus 7030

check price »

Megapixels

6.00

14.00

Max. image resolution

2832 x 2128

4288 x 3216

Sensor

Sensor type

CCD

Sensor size

1/2.5" (~ 5.75 x 4.32 mm)

1/2.33" (~ 6.08 x 4.56 mm)

Sensor resolution

2825 x 2124

4315 x 3244

Diagonal

7.19 mm

7.60 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1.12
(ratio)

Kodak EasyShare V610		Olympus Stylus 7030

Surface area:

24.84 mm²

27.72 mm²

Difference: 2.88 mm² (12%)

7030 sensor is approx. 1.12x bigger than V610 sensor.

Note: You are comparing cameras of different generations. There is a 4 year gap between Kodak V610 (2006) and Olympus 7030 (2010). All things being equal, newer sensor generations generally outperform the older.

Pixel pitch

2.04 µm

1.41 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0.63 µm (45%)

Pixel pitch of V610 is approx. 45% higher than pixel pitch of 7030.

Pixel area

4.16 µm²

1.99 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 2.17 µm² (109%)

A pixel on Kodak V610 sensor is approx. 109% bigger than a pixel on Olympus 7030.

Pixel density

24.14 MP/cm²

50.37 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 26.23 µm (109%)

Olympus 7030 has approx. 109% higher pixel density than Kodak V610.

To learn about the accuracy of these numbers, click here.

Specs

Kodak V610

Olympus 7030

Crop factor

6.02

5.69

Total megapixels

6.30

14.50

Effective megapixels

6.00

14.00

Optical zoom

10x

Digital zoom

Yes

ISO sensitivity

Auto, 64, 100, 200, 400, 800

Auto, 64, 100, 200, 400, 800, 1600, High Auto

RAW

Manual focus

Normal focus range

60 cm

70 cm

Macro focus range

5 cm

2 cm

Focal length (35mm equiv.)

38 - 380 mm

28 - 196 mm

Aperture priority

Max. aperture

f3.9 - f4.8

f3.0 - f5.9

Max. aperture (35mm equiv.)

f23.5 - f28.9

f17.1 - f33.6

Metering

Centre weighted, Multi-pattern, Spot

Multi, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Min. shutter speed

8 sec

4 sec

Max. shutter speed

1/1200 sec

1/2000 sec

Built-in flash

External flash

Viewfinder

None

White balance presets

Screen size

2.8"

2.7"

Screen resolution

230,000 dots

Video capture

Max. video resolution

Storage types

Secure Digital

SC/SDHC, Internal

USB

USB 1.0

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

Kodak Lithium-Ion, dock

Lithium-Ion LI-50B rechargeable battery

Weight

160 g

140 g

Dimensions

111 x 55.5 x 23.2 mm

93 x 56 x 26 mm

Year

2006

2010

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Kodak V610 diagonal

The diagonal of V610 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm

Diagonal = √

5.75² + 4.32²

= 7.19 mm

Olympus 7030 diagonal

The diagonal of 7030 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of that value - 7.6 mm. If you want to know why, see sensor sizes.

w = 6.08 mm
h = 4.56 mm

Diagonal = √

6.08² + 4.56²

= 7.60 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

V610 sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²

7030 sensor area

Width = 6.08 mm
Height = 4.56 mm

Surface area = 6.08 × 4.56 = 27.72 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

V610 pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 2825 pixels

Pixel pitch =	5.75	× 1000	= 2.04 µm
	2825

7030 pixel pitch

Sensor width = 6.08 mm
Sensor resolution width = 4315 pixels

Pixel pitch =	6.08	× 1000	= 1.41 µm
	4315

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

V610 pixel area

Pixel pitch = 2.04 µm

Pixel area = 2.04² = 4.16 µm²

7030 pixel area

Pixel pitch = 1.41 µm

Pixel area = 1.41² = 1.99 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

V610 pixel density

Sensor resolution width = 2825 pixels
Sensor width = 0.575 cm

Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²

7030 pixel density

Sensor resolution width = 4315 pixels
Sensor width = 0.608 cm

Pixel density = (4315 / 0.608)² / 1000000 = 50.37 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

V610 sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.00

r = 5.75/4.32 = 1.33

X = √	6.00 × 1000000	= 2124
	1.33

Resolution horizontal: X × r = 2124 × 1.33 = 2825
Resolution vertical: X = 2124

Sensor resolution = 2825 x 2124

7030 sensor resolution

Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 14.00

r = 6.08/4.56 = 1.33

X = √	14.00 × 1000000	= 3244
	1.33

Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244

Sensor resolution = 4315 x 3244

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

V610 crop factor

Sensor diagonal in mm = 7.19 mm

Crop factor =	43.27	= 6.02
	7.19

7030 crop factor

Sensor diagonal in mm = 7.60 mm

Crop factor =	43.27	= 5.69
	7.60

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

V610 equivalent aperture

Crop factor = 6.02
Aperture = f3.9 - f4.8

35-mm equivalent aperture = (f3.9 - f4.8) × 6.02 = f23.5 - f28.9

7030 equivalent aperture

Crop factor = 5.69
Aperture = f3.0 - f5.9

35-mm equivalent aperture = (f3.0 - f5.9) × 5.69 = f17.1 - f33.6

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.