Pentax Optio MX4 vs. Ricoh GR Digital 3
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Pentax Optio MX4 | Ricoh GR Digital 3 | ||||
| check price » | check price » | ||||
Megapixels
4.00
10.40
Max. image resolution
2304 x 1728
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.99 |
| (ratio) | ||
| Pentax Optio MX4 | Ricoh GR Digital 3 | |
Surface area:
| 21.32 mm² | vs | 42.47 mm² |
Difference: 21.15 mm² (99%)
GR 3 sensor is approx. 1.99x bigger than MX4 sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Pentax MX4 (2004) and Ricoh GR 3 (2009).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.26 µm² (31%)
A pixel on Pentax MX4 sensor is approx. 31% bigger than a pixel on Ricoh GR 3.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Pentax MX4
Ricoh GR 3
Total megapixels
4.20
Effective megapixels
4.00
Optical zoom
10x
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 64, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
40 cm
30 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
37 - 370 mm
28 mm
Aperture priority
Yes
Yes
Max. aperture
f2.9 - f3.5
f1.9
Metering
Centre weighted, Multi-segment, Spot
256-segment Matrix, Centre weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
4 sec
1 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
Optical (optional)
White balance presets
6
6
Screen size
1.8"
3"
Screen resolution
134,000 dots
920,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
Lithium-Ion DB-70 rechargeable battery
Weight
330 g
188 g
Dimensions
73 x 59 x 104 mm
109 x 59 x 26 mm
Year
2004
2009
Choose cameras to compare
Popular comparisons:
- Pentax Optio MX4 vs. Pentax Optio MX
- Pentax Optio MX4 vs. Sony Cyber-shot DSC-RX100
- Pentax Optio MX4 vs. Pentax Optio H90
- Pentax Optio MX4 vs. Pentax *ist DL
- Pentax Optio MX4 vs. Pentax Optio Z10
- Pentax Optio MX4 vs. Canon Digital IXUS 800 IS
- Pentax Optio MX4 vs. Kodak EasyShare M893 IS
- Pentax Optio MX4 vs. Ricoh GR Digital 4
- Pentax Optio MX4 vs. Ricoh GR Digital 3
- Pentax Optio MX4 vs. Pentax X90
- Pentax Optio MX4 vs. Pentax Q-S1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Pentax MX4 diagonal
The diagonal of MX4 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
| Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Ricoh GR 3 diagonal
The diagonal of GR 3 sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
| Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
MX4 sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
GR 3 sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
MX4 pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 2306 pixels
Sensor resolution width = 2306 pixels
| Pixel pitch = | 5.33 | × 1000 | = 2.31 µm |
| 2306 |
GR 3 pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 3733 pixels
Sensor resolution width = 3733 pixels
| Pixel pitch = | 7.53 | × 1000 | = 2.02 µm |
| 3733 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
MX4 pixel area
Pixel pitch = 2.31 µm
Pixel area = 2.31² = 5.34 µm²
Pixel area = 2.31² = 5.34 µm²
GR 3 pixel area
Pixel pitch = 2.02 µm
Pixel area = 2.02² = 4.08 µm²
Pixel area = 2.02² = 4.08 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
MX4 pixel density
Sensor resolution width = 2306 pixels
Sensor width = 0.533 cm
Pixel density = (2306 / 0.533)² / 1000000 = 18.72 MP/cm²
Sensor width = 0.533 cm
Pixel density = (2306 / 0.533)² / 1000000 = 18.72 MP/cm²
GR 3 pixel density
Sensor resolution width = 3733 pixels
Sensor width = 0.753 cm
Pixel density = (3733 / 0.753)² / 1000000 = 24.58 MP/cm²
Sensor width = 0.753 cm
Pixel density = (3733 / 0.753)² / 1000000 = 24.58 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
MX4 sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 4.00
Resolution horizontal: X × r = 1734 × 1.33 = 2306
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Sensor height = 4.00 mm
Effective megapixels = 4.00
| r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
GR 3 sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 10.40
Resolution horizontal: X × r = 2786 × 1.34 = 3733
Resolution vertical: X = 2786
Sensor resolution = 3733 x 2786
Sensor height = 5.64 mm
Effective megapixels = 10.40
| r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 2786
Sensor resolution = 3733 x 2786
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
MX4 crop factor
Sensor diagonal in mm = 6.66 mm
| Crop factor = | 43.27 | = 6.5 |
| 6.66 |
GR 3 crop factor
Sensor diagonal in mm = 9.41 mm
| Crop factor = | 43.27 | = 4.6 |
| 9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
MX4 equivalent aperture
Crop factor = 6.5
Aperture = f2.9 - f3.5
35-mm equivalent aperture = (f2.9 - f3.5) × 6.5 = f18.9 - f22.8
Aperture = f2.9 - f3.5
35-mm equivalent aperture = (f2.9 - f3.5) × 6.5 = f18.9 - f22.8
GR 3 equivalent aperture
Crop factor = 4.6
Aperture = f1.9
35-mm equivalent aperture = (f1.9) × 4.6 = f8.7
Aperture = f1.9
35-mm equivalent aperture = (f1.9) × 4.6 = f8.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.