Praktica DC Slim 5 vs. Olympus Stylus 600
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Praktica DC Slim 5 | Olympus Stylus 600 | ||||
| check price » | check price » | ||||
Megapixels
5.10
6.00
Max. image resolution
3680 x 2760
2816 x 2112
Sensor
Sensor type
CMOS
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.53 | : | 1 |
| (ratio) | ||
| Praktica DC Slim 5 | Olympus Stylus 600 | |
Surface area:
| 37.90 mm² | vs | 24.84 mm² |
Difference: 13.06 mm² (53%)
DC Slim 5 sensor is approx. 1.53x bigger than 600 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 3.29 µm² (79%)
A pixel on Praktica DC Slim 5 sensor is approx. 79% bigger than a pixel on Olympus 600.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Praktica DC Slim 5
Olympus 600
Total megapixels
6.40
Effective megapixels
6.00
Optical zoom
No
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto
Auto, 64, 100, 200, 400, 500, (2MP; 800, 1600)
RAW
Manual focus
Normal focus range
120 cm
50 cm
Macro focus range
19 cm
7 cm
Focal length (35mm equiv.)
48 mm
35 - 105 mm
Aperture priority
No
No
Max. aperture
f3
f3.1 - f5.2
Metering
Centre weighted
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
4 sec
Max. shutter speed
1/1000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
4
6
Screen size
2"
2.5"
Screen resolution
153,600 dots
115,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
xD Picture Card, Internal
USB
USB 2.0 (480 Mbit/sec)
USB 1.0
HDMI
Wireless
GPS
Battery
2x AAA
Lithium-Ion rechargeable
Weight
95 g
195 g
Dimensions
92 x 58 x 27 mm
97 x 55 x 27 mm
Year
2005
2005
Choose cameras to compare
Popular comparisons:
- Praktica DC Slim 5 vs. Nikon 1 J2
- Praktica DC Slim 5 vs. Praktica DCZ 5.3
- Praktica DC Slim 5 vs. Nikon Coolpix W300
- Praktica DC Slim 5 vs. Kodak EasyShare C190
- Praktica DC Slim 5 vs. Acer CE-5330
- Praktica DC Slim 5 vs. Olympus Stylus 600
- Praktica DC Slim 5 vs. Sony Cyber-shot DSC-U30
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Praktica DC Slim 5 diagonal
The diagonal of DC Slim 5 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Olympus 600 diagonal
The diagonal of 600 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DC Slim 5 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
600 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DC Slim 5 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2604 pixels
Sensor resolution width = 2604 pixels
| Pixel pitch = | 7.11 | × 1000 | = 2.73 µm |
| 2604 |
600 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2825 pixels
Sensor resolution width = 2825 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.04 µm |
| 2825 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DC Slim 5 pixel area
Pixel pitch = 2.73 µm
Pixel area = 2.73² = 7.45 µm²
Pixel area = 2.73² = 7.45 µm²
600 pixel area
Pixel pitch = 2.04 µm
Pixel area = 2.04² = 4.16 µm²
Pixel area = 2.04² = 4.16 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DC Slim 5 pixel density
Sensor resolution width = 2604 pixels
Sensor width = 0.711 cm
Pixel density = (2604 / 0.711)² / 1000000 = 13.41 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2604 / 0.711)² / 1000000 = 13.41 MP/cm²
600 pixel density
Sensor resolution width = 2825 pixels
Sensor width = 0.575 cm
Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DC Slim 5 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 5.10
Resolution horizontal: X × r = 1958 × 1.33 = 2604
Resolution vertical: X = 1958
Sensor resolution = 2604 x 1958
Sensor height = 5.33 mm
Effective megapixels = 5.10
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1958
Sensor resolution = 2604 x 1958
600 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.00
Resolution horizontal: X × r = 2124 × 1.33 = 2825
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
Sensor height = 4.32 mm
Effective megapixels = 6.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DC Slim 5 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
600 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DC Slim 5 equivalent aperture
Crop factor = 4.87
Aperture = f3
35-mm equivalent aperture = (f3) × 4.87 = f14.6
Aperture = f3
35-mm equivalent aperture = (f3) × 4.87 = f14.6
600 equivalent aperture
Crop factor = 6.02
Aperture = f3.1 - f5.2
35-mm equivalent aperture = (f3.1 - f5.2) × 6.02 = f18.7 - f31.3
Aperture = f3.1 - f5.2
35-mm equivalent aperture = (f3.1 - f5.2) × 6.02 = f18.7 - f31.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.