Rollei d530 flex vs. Kodak EasyShare C663
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Rollei d530 flex | Kodak EasyShare C663 | ||||
| check price » | check price » | ||||
Megapixels
5.00
6.00
Max. image resolution
2552 x 1920
2832 x 2128
Sensor
Sensor type
CCD
CCD
Sensor size
2/3" (~ 8.8 x 6.6 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 2.34 | : | 1 |
| (ratio) | ||
| Rollei d530 flex | Kodak EasyShare C663 | |
Surface area:
| 58.08 mm² | vs | 24.84 mm² |
Difference: 33.24 mm² (134%)
d530 flex sensor is approx. 2.34x bigger than C663 sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Rollei d530 flex (2002) and Kodak C663 (2006).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 7.47 µm² (180%)
A pixel on Rollei d530 flex sensor is approx. 180% bigger than a pixel on Kodak C663.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Rollei d530 flex
Kodak C663
Total megapixels
6.10
Effective megapixels
6.00
Optical zoom
Yes
3x
Digital zoom
Yes
Yes
ISO sensitivity
100
Auto, 80, 160, 200, 400, 800
RAW
Manual focus
Normal focus range
60 cm
60 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
40 - 120 mm
34 - 102 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f4
f2.7 - f4.6
Metering
Centre weighted
Centre weighted, Matrix, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1 sec
8 sec
Max. shutter speed
1/1000 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
Optical
Optical (tunnel)
White balance presets
5
Screen size
2.5"
2.5"
Screen resolution
112,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
USB
USB 1.0
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
Weight
800 g
190 g
Dimensions
151 x 102 x 106 mm
85 x 65 x 35 mm
Year
2002
2006
Choose cameras to compare
Popular comparisons:
- Rollei d530 flex vs. Canon Digital IXUS 330
- Rollei d530 flex vs. Nikon Coolpix P520
- Rollei d530 flex vs. Olympus C-2100 UZ
- Rollei d530 flex vs. Rollei da10
- Rollei d530 flex vs. Kodak EasyShare C663
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Rollei d530 flex diagonal
The diagonal of d530 flex sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
| Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Kodak C663 diagonal
The diagonal of C663 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
d530 flex sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
C663 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
d530 flex pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
| Pixel pitch = | 8.80 | × 1000 | = 3.41 µm |
| 2579 |
C663 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2825 pixels
Sensor resolution width = 2825 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.04 µm |
| 2825 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
d530 flex pixel area
Pixel pitch = 3.41 µm
Pixel area = 3.41² = 11.63 µm²
Pixel area = 3.41² = 11.63 µm²
C663 pixel area
Pixel pitch = 2.04 µm
Pixel area = 2.04² = 4.16 µm²
Pixel area = 2.04² = 4.16 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
d530 flex pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.88 cm
Pixel density = (2579 / 0.88)² / 1000000 = 8.59 MP/cm²
Sensor width = 0.88 cm
Pixel density = (2579 / 0.88)² / 1000000 = 8.59 MP/cm²
C663 pixel density
Sensor resolution width = 2825 pixels
Sensor width = 0.575 cm
Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
d530 flex sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 6.60 mm
Effective megapixels = 5.00
| r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
C663 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.00
Resolution horizontal: X × r = 2124 × 1.33 = 2825
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
Sensor height = 4.32 mm
Effective megapixels = 6.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
d530 flex crop factor
Sensor diagonal in mm = 11.00 mm
| Crop factor = | 43.27 | = 3.93 |
| 11.00 |
C663 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
d530 flex equivalent aperture
Crop factor = 3.93
Aperture = f2.8 - f4
35-mm equivalent aperture = (f2.8 - f4) × 3.93 = f11 - f15.7
Aperture = f2.8 - f4
35-mm equivalent aperture = (f2.8 - f4) × 3.93 = f11 - f15.7
C663 equivalent aperture
Crop factor = 6.02
Aperture = f2.7 - f4.6
35-mm equivalent aperture = (f2.7 - f4.6) × 6.02 = f16.3 - f27.7
Aperture = f2.7 - f4.6
35-mm equivalent aperture = (f2.7 - f4.6) × 6.02 = f16.3 - f27.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.