Rollei Prego dp8300 vs. GE E1410SW
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Rollei Prego dp8300 | GE E1410SW | ||||
| check price » | check price » | ||||
Megapixels
8.10
14.40
Max. image resolution
3264 x 2448
4320 x 3240
Sensor
Sensor type
n/a
CMOS
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.33 | : | 1 |
| (ratio) | ||
| Rollei Prego dp8300 | GE E1410SW | |
Surface area:
| 37.90 mm² | vs | 28.46 mm² |
Difference: 9.44 mm² (33%)
Prego dp8300 sensor is approx. 1.33x bigger than E1410SW sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 7 years between Rollei Prego dp8300 (2005) and GE E1410SW (2012).
Seven years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.72 µm² (137%)
A pixel on Rollei Prego dp8300 sensor is approx. 137% bigger than a pixel on GE E1410SW.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Rollei Prego dp8300
GE E1410SW
Total megapixels
Effective megapixels
Optical zoom
Yes
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
36 - 108 mm
28 - 280 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.8
f3.2 - f5.6
Metering
Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/2 sec
Max. shutter speed
1/1500 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
Screen size
2.5"
Screen resolution
Video capture
Max. video resolution
Storage types
Secure Digital
SDHC, Secure Digital
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Li-Ion
Weight
150 g
Dimensions
91 x 57 x 27 mm
Year
2005
2012
Choose cameras to compare
Popular comparisons:
- Rollei Prego dp8300 vs. Rollei RCP-8325X
- Rollei Prego dp8300 vs. Nikon Coolpix S33
- Rollei Prego dp8300 vs. Fujifilm FinePix AX245w
- Rollei Prego dp8300 vs. Leica D-Lux 6
- Rollei Prego dp8300 vs. Nikon Coolpix 885
- Rollei Prego dp8300 vs. Nikon Coolpix S9900
- Rollei Prego dp8300 vs. Vivitar ViviCam 8300s
- Rollei Prego dp8300 vs. Rollei Prego dp6300
- Rollei Prego dp8300 vs. GE E1410SW
- Rollei Prego dp8300 vs. Jenoptik JD 4100 zoom
- Rollei Prego dp8300 vs. Kodak EasyShare Z1012 IS
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Rollei Prego dp8300 diagonal
The diagonal of Prego dp8300 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
GE E1410SW diagonal
The diagonal of E1410SW sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Prego dp8300 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
E1410SW sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Prego dp8300 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3282 pixels
Sensor resolution width = 3282 pixels
| Pixel pitch = | 7.11 | × 1000 | = 2.17 µm |
| 3282 |
E1410SW pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4376 pixels
Sensor resolution width = 4376 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.41 µm |
| 4376 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Prego dp8300 pixel area
Pixel pitch = 2.17 µm
Pixel area = 2.17² = 4.71 µm²
Pixel area = 2.17² = 4.71 µm²
E1410SW pixel area
Pixel pitch = 1.41 µm
Pixel area = 1.41² = 1.99 µm²
Pixel area = 1.41² = 1.99 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Prego dp8300 pixel density
Sensor resolution width = 3282 pixels
Sensor width = 0.711 cm
Pixel density = (3282 / 0.711)² / 1000000 = 21.31 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3282 / 0.711)² / 1000000 = 21.31 MP/cm²
E1410SW pixel density
Sensor resolution width = 4376 pixels
Sensor width = 0.616 cm
Pixel density = (4376 / 0.616)² / 1000000 = 50.47 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4376 / 0.616)² / 1000000 = 50.47 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Prego dp8300 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 8.10
Resolution horizontal: X × r = 2468 × 1.33 = 3282
Resolution vertical: X = 2468
Sensor resolution = 3282 x 2468
Sensor height = 5.33 mm
Effective megapixels = 8.10
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2468
Sensor resolution = 3282 x 2468
E1410SW sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.40
Resolution horizontal: X × r = 3290 × 1.33 = 4376
Resolution vertical: X = 3290
Sensor resolution = 4376 x 3290
Sensor height = 4.62 mm
Effective megapixels = 14.40
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3290
Sensor resolution = 4376 x 3290
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Prego dp8300 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
E1410SW crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Prego dp8300 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
E1410SW equivalent aperture
Crop factor = 5.62
Aperture = f3.2 - f5.6
35-mm equivalent aperture = (f3.2 - f5.6) × 5.62 = f18 - f31.5
Aperture = f3.2 - f5.6
35-mm equivalent aperture = (f3.2 - f5.6) × 5.62 = f18 - f31.5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.