Sanyo Xacti E60 vs. Fujifilm X-T50
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Sanyo Xacti E60 | Fujifilm X-T50 | ||||
| check price » | check price » | ||||
Megapixels
6.37
40.20
Max. image resolution
3680 x 2760
7728 x 5152
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
23.5 x 15.7 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 14.85 |
| (ratio) | ||
| Sanyo Xacti E60 | Fujifilm X-T50 | |
Surface area:
| 24.84 mm² | vs | 368.95 mm² |
Difference: 344.11 mm² (1385%)
X-T50 sensor is approx. 14.85x bigger than E60 sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 18 years between Sanyo E60 (2006) and
Fujifilm X-T50 (2024).
Eighteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 5.26 µm² (134%)
A pixel on Fujifilm X-T50 sensor is approx. 134% bigger than a pixel on Sanyo E60.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Sanyo E60
Fujifilm X-T50
Total megapixels
Effective megapixels
40.20
Optical zoom
Yes
Digital zoom
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 125-12800 (extends to 64-51200)
RAW
Manual focus
Normal focus range
20 cm
Macro focus range
1 cm
Focal length (35mm equiv.)
38 - 114 mm
Aperture priority
No
Yes
Max. aperture
f3.3 - f4.4
Metering
Centre weighted, Multi-segment, Spot
Multi, Center-weighted, Average, Spot
Exposure compensation
±1.8 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
2 sec
30 sec
Max. shutter speed
1/2000 sec
1/180000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
6
7
Screen size
3"
3"
Screen resolution
230,000 dots
1,840,000 dots
Video capture
Max. video resolution
6240x3510 (30p/25p/24p)
Storage types
Secure Digital
SD/SDHC/SDXC (UHS-II)
USB
USB 2.0 (480 Mbit/sec)
USB 3.2 (10 GBit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
NP-W126S Lithium-Ion battery
Weight
155 g
438 g
Dimensions
97,7 x 22,8 x 59,5 mm
123.8 x 84 x 48.8 mm
Year
2006
2024
Choose cameras to compare
Popular comparisons:
- Sanyo Xacti E60 vs. Sanyo Xacti E6
- Sanyo Xacti E60 vs. Canon PowerShot SX150 IS
- Sanyo Xacti E60 vs. Samsung ST200F
- Sanyo Xacti E60 vs. Canon DIGITAL IXUS 55
- Sanyo Xacti E60 vs. Fujifilm X-T50
- Sanyo Xacti E60 vs. Canon PowerShot SX160 IS
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Sanyo E60 diagonal
The diagonal of E60 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Fujifilm X-T50 diagonal
w = 23.50 mm
h = 15.70 mm
h = 15.70 mm
| Diagonal = √ | 23.50² + 15.70² | = 28.26 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
E60 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
X-T50 sensor area
Width = 23.50 mm
Height = 15.70 mm
Surface area = 23.50 × 15.70 = 368.95 mm²
Height = 15.70 mm
Surface area = 23.50 × 15.70 = 368.95 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
E60 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2910 pixels
Sensor resolution width = 2910 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.98 µm |
| 2910 |
X-T50 pixel pitch
Sensor width = 23.50 mm
Sensor resolution width = 7766 pixels
Sensor resolution width = 7766 pixels
| Pixel pitch = | 23.50 | × 1000 | = 3.03 µm |
| 7766 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
E60 pixel area
Pixel pitch = 1.98 µm
Pixel area = 1.98² = 3.92 µm²
Pixel area = 1.98² = 3.92 µm²
X-T50 pixel area
Pixel pitch = 3.03 µm
Pixel area = 3.03² = 9.18 µm²
Pixel area = 3.03² = 9.18 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
E60 pixel density
Sensor resolution width = 2910 pixels
Sensor width = 0.575 cm
Pixel density = (2910 / 0.575)² / 1000000 = 25.61 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2910 / 0.575)² / 1000000 = 25.61 MP/cm²
X-T50 pixel density
Sensor resolution width = 7766 pixels
Sensor width = 2.35 cm
Pixel density = (7766 / 2.35)² / 1000000 = 10.92 MP/cm²
Sensor width = 2.35 cm
Pixel density = (7766 / 2.35)² / 1000000 = 10.92 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
E60 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.37
Resolution horizontal: X × r = 2188 × 1.33 = 2910
Resolution vertical: X = 2188
Sensor resolution = 2910 x 2188
Sensor height = 4.32 mm
Effective megapixels = 6.37
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2188
Sensor resolution = 2910 x 2188
X-T50 sensor resolution
Sensor width = 23.50 mm
Sensor height = 15.70 mm
Effective megapixels = 40.20
Resolution horizontal: X × r = 5177 × 1.5 = 7766
Resolution vertical: X = 5177
Sensor resolution = 7766 x 5177
Sensor height = 15.70 mm
Effective megapixels = 40.20
| r = 23.50/15.70 = 1.5 |
|
Resolution vertical: X = 5177
Sensor resolution = 7766 x 5177
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
E60 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
X-T50 crop factor
Sensor diagonal in mm = 28.26 mm
| Crop factor = | 43.27 | = 1.53 |
| 28.26 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
E60 equivalent aperture
Crop factor = 6.02
Aperture = f3.3 - f4.4
35-mm equivalent aperture = (f3.3 - f4.4) × 6.02 = f19.9 - f26.5
Aperture = f3.3 - f4.4
35-mm equivalent aperture = (f3.3 - f4.4) × 6.02 = f19.9 - f26.5
X-T50 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Fujifilm X-T50, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Fujifilm X-T50 is 1.53
Crop factor for Fujifilm X-T50 is 1.53
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.