Sony Cyber-shot DSC-F55 vs. Sony Alpha a7R III
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Sony Cyber-shot DSC-F55 | Sony Alpha a7R III | ||||
| check price » | check price » | ||||
Megapixels
1.90
42.40
Max. image resolution
1600 x 1200
7952 x 5304
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2" (~ 6.4 x 4.8 mm)
35.9 x 24 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 28.05 |
| (ratio) | ||
| Sony Cyber-shot DSC-F55 | Sony Alpha a7R III | |
Surface area:
| 30.72 mm² | vs | 861.60 mm² |
Difference: 830.88 mm² (2705%)
Alpha a7R III sensor is approx. 28.05x bigger than F55 sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 18 years between Sony F55 (1999) and
Sony Alpha a7R III (2017).
Eighteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 4.01 µm² (25%)
A pixel on Sony Alpha a7R III sensor is approx. 25% bigger than a pixel on Sony F55.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Sony F55
Sony Alpha a7R III
Total megapixels
43.60
Effective megapixels
42.40
Optical zoom
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100-32000 (expandable to 50-102400)
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
10 cm
Focal length (35mm equiv.)
37 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f3.0
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±1.5 EV (in 1/2 EV steps)
±5 EV (in 1/3 EV, 1/2 EV, 1 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1/60 sec
30 sec
Max. shutter speed
1/750 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
4
10
Screen size
2"
3"
Screen resolution
123,000 dots
1,440,000 dots
Video capture
Max. video resolution
3840x2160 (30p/25p/24p)
Storage types
Memory Stick
SD/SDHC/SDXC/MS PRO Duo
USB
USB 1.0
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
InfoLithium (NP-FS11)
NP-FZ100 lithium-ion battery
Weight
300 g
657 g
Dimensions
103 x 79 x 48 mm
126.9 x 95.6 x 73.7 mm
Year
1999
2017
Choose cameras to compare
Popular comparisons:
- Sony Cyber-shot DSC-F55 vs. Sony Cyber-shot DSC-F55v
- Sony Cyber-shot DSC-F55 vs. Sony Cyber-shot DSC-F77
- Sony Cyber-shot DSC-F55 vs. Sony Cyber-shot DSC-RX100
- Sony Cyber-shot DSC-F55 vs. Nikon D7000
- Sony Cyber-shot DSC-F55 vs. Samsung ST66
- Sony Cyber-shot DSC-F55 vs. Sony Cyber-shot DSC-D770
- Sony Cyber-shot DSC-F55 vs. Sony Cyber-shot DSC-W350
- Sony Cyber-shot DSC-F55 vs. Minolta DiMAGE Xt
- Sony Cyber-shot DSC-F55 vs. Sony Alpha a7R III
- Sony Cyber-shot DSC-F55 vs. Fujifilm FinePix F650 Zoom
- Sony Cyber-shot DSC-F55 vs. Sony Cyber-shot DSC-F505
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Sony F55 diagonal
The diagonal of F55 sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Sony Alpha a7R III diagonal
w = 35.90 mm
h = 24.00 mm
h = 24.00 mm
| Diagonal = √ | 35.90² + 24.00² | = 43.18 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
F55 sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Alpha a7R III sensor area
Width = 35.90 mm
Height = 24.00 mm
Surface area = 35.90 × 24.00 = 861.60 mm²
Height = 24.00 mm
Surface area = 35.90 × 24.00 = 861.60 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
F55 pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1589 pixels
Sensor resolution width = 1589 pixels
| Pixel pitch = | 6.40 | × 1000 | = 4.03 µm |
| 1589 |
Alpha a7R III pixel pitch
Sensor width = 35.90 mm
Sensor resolution width = 7976 pixels
Sensor resolution width = 7976 pixels
| Pixel pitch = | 35.90 | × 1000 | = 4.5 µm |
| 7976 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
F55 pixel area
Pixel pitch = 4.03 µm
Pixel area = 4.03² = 16.24 µm²
Pixel area = 4.03² = 16.24 µm²
Alpha a7R III pixel area
Pixel pitch = 4.5 µm
Pixel area = 4.5² = 20.25 µm²
Pixel area = 4.5² = 20.25 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
F55 pixel density
Sensor resolution width = 1589 pixels
Sensor width = 0.64 cm
Pixel density = (1589 / 0.64)² / 1000000 = 6.16 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1589 / 0.64)² / 1000000 = 6.16 MP/cm²
Alpha a7R III pixel density
Sensor resolution width = 7976 pixels
Sensor width = 3.59 cm
Pixel density = (7976 / 3.59)² / 1000000 = 4.94 MP/cm²
Sensor width = 3.59 cm
Pixel density = (7976 / 3.59)² / 1000000 = 4.94 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
F55 sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.90
Resolution horizontal: X × r = 1195 × 1.33 = 1589
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
Sensor height = 4.80 mm
Effective megapixels = 1.90
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
Alpha a7R III sensor resolution
Sensor width = 35.90 mm
Sensor height = 24.00 mm
Effective megapixels = 42.40
Resolution horizontal: X × r = 5317 × 1.5 = 7976
Resolution vertical: X = 5317
Sensor resolution = 7976 x 5317
Sensor height = 24.00 mm
Effective megapixels = 42.40
| r = 35.90/24.00 = 1.5 |
|
Resolution vertical: X = 5317
Sensor resolution = 7976 x 5317
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
F55 crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
Alpha a7R III crop factor
Sensor diagonal in mm = 43.18 mm
| Crop factor = | 43.27 | = 1 |
| 43.18 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
F55 equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f3.0
35-mm equivalent aperture = (f2.8 - f3.0) × 5.41 = f15.1 - f16.2
Aperture = f2.8 - f3.0
35-mm equivalent aperture = (f2.8 - f3.0) × 5.41 = f15.1 - f16.2
Alpha a7R III equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony Alpha a7R III, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Sony Alpha a7R III is 1, the equivalent aperture is aperture.
Since crop factor for Sony Alpha a7R III is 1, the equivalent aperture is aperture.
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.